Changzhou Jianlian Reinforcing Bar Conjunction Co.,Ltd

Showing 1 - 10 of 15, total 2 pages [First] [Previous] [Next] [Last]

cold extrusion press machine
Specification: YJ650&YJ800
Detail: Cold extrusion press system contains: 1. YJ650 machine (process rebar diameter 16mm to 32mm ). 2. YJ800 machine (process rebar diameter 36mm to 40mm). 3. One full set of YJ650 and Pressure Equipment of YJ800 can process 16m...

rebar coupler
Specification: 12-40MM
Detail: Rebar coupler can connect rebar diameter from 12mm to 40mm, the standard tensile strength of rebar connector is not less than 627***. We can also improve the strength according to clients requirment, such as the tensile streng...

taper thread machine
Specification: 16mm to 40mm
Detail: Taper thread machine can process thread on rebar diameter from 16mm to 40mm taper thread machine,taper threading machine,rebar connection machine

cold extrusion press machine
Specification: 16mm to 32mm
Detail: Cold extrusion press system contains: 1. YJ650 machine (process rebar diameter 16mm to 32mm ). 2. YJ800 machine (process rebar diameter 36mm to 40mm). 3. One full set of YJ650 and Pressure Equipment of YJ800 can process 16m...

cold extrusion pess coupler
Specification: 16mm~40mm
Detail: Cold Stamping Coupler,steel bar sleeve,rebar coupler,stamping coupler

rib peeling roll stamping machine(jhb400)
Specification: JHB400
Detail: First, prepare the rebars which will be connected. Second, we use the JHB400 to roll stamping after peeling rib of the rebars; Third, we use the coupler to link the two ends of rebar.

rib peeling roll stamping coupler
Specification: 16mm to 40mm
Detail: China 16mm to 40mm-rib peeling roll stamping coupler manufacturer & supplier. Our products and technology have past GB/T19001-2000idt,ISO9001:2000 international quality management system and CE certification.

upset forging machine
Specification: Φ12mm-Φ40mm
Detail: Product name : GD-150 Upset forging machine Working range: Φ12mm-Φ40mm Motor power: 4.0KW we use GD-150 to forging the end of rebar.

threading machine
Specification: Φ12mm-Φ40mm
Detail: Product name : GZL-45 threading machine Working range: Φ12mm-Φ40mm Motor power: 3/2.4KW we use the GZL-45 to threading the end of rebar.


Showing 1 - 10 of 15, total 2 pages [First] [Previous] [Next] [Last]
1 2